ChiHai Make some of the best quality gel blaster motors to date. Great value, premium quality and a reasonable price.
PLEASE NOTE THIS ITEM IS ORDER ONLY AND EXPRESS POSTED DIRECTLY TO YOU.
NO 1 high torque brushless motor
- Low heat at high output, about 50% less than a brushmotor.
- Long service life, stable battery, proper maintenance, service time can exceed 5000H
- Power off emergency stop, no buffering, stable output guarantee
- DC 7.4V speed 32000rpm DC: 11.1V speed 48000rpm
YOUR BATTERY MUST BE CONNECTED WITH AN XT30 TYPE PLUG TO ENSURE PROPER CURRENT FLOW!
RECOMMENED PARTS TO MATCH MOTOR:
- M80 - M160.
- 1:18 higher than the steel gear cutting wheel output or use 1:16 steel gear cutting wheel suitable speed. (1:13 is not recommended, because the speed of the motor is too fast)
- 7.4v 25A battery (1300mAH 20C) More conducive to the long-term service life.
- No need to connect to any FET fire control system for direct electrification.
SUITABLE FOR V2 GEARBOX
- JIN MING M4A1 J9, JM-ACR J10
(YOU WILL NEED SPECIAL BRACKETS TO INSTALL THIS MOTOR TO THE ABOVE GEARBOX)
- WARINTEREST HK416D / KUBLAI BD556
- JINGJI SLR / NEW WELL M4
- FB WAVE BOX FIGHTING BRO
NUMBER ONE high torque brushless 480 motor DC motor Specs.
- 7.4V 32000 RPM
- 11.1V 48000 RPM
- 29.5mm x 25.2mm x 88mm (with shaft and gear).
OUPUT BEVEL GEAR:
- 10 teeth D hole hardened and hardened gear.
BEFORE USE PLEASE NOTE:
- YOUR BATTERY MUST BE CONNECTED WITH AN XT30 TYPE PLUG TO ENSURE PROPER CURRENT FLOW!
- The positive and negative electrodes of brushless motor power input shall be connected according to the label, and cannot be input in reverse (key note)
- Electronic trigger systems are not allowed
- Some of the fire control tests have shown burning phenomenon (such as TaiTan).